ZIP Code 21224
Baltimore County, Maryland — Baltimore
What This Means
Baltimore County, Maryland has moderately hard water, estimated at 96.4 mg/L (PPM). At this level, you may notice some mineral buildup on fixtures and inside appliances over time. A water softener is optional but can help extend appliance life. Most people don't notice significant issues at this hardness level.
What You Should Do
Hardness Details
| ZIP Code | 21224 |
| County | Baltimore |
| City | Baltimore |
| State | Maryland (MD) |
| Hardness (PPM) | 96.4 mg/L — Moderately Hard |
| Hardness (GPG) | 5.6 grains/gallon |
| Classification | 61 - 120 mg/L |
Source: USGS Water Quality Portal, county-level median
USGS Monitoring Data
| Monitoring Stations | 97 |
| Range | 3 – 4100 mg/L |
| Most Recent Data | 2003 |
| Data Quality | Limited |
⚠ Limited monitoring data for this county. Estimate may be less accurate.
Source: USGS Water Quality Portal
Effects at 96.4 PPM Hardness
At 96.4 ppm, some minor effects are possible: slight soap scum on shower doors, occasional water spots on dishes and glassware. Sensitive skin may notice dryness after showers. Appliance efficiency is minimally affected, but you may see light mineral deposits on faucets over time.
Is Baltimore Water Safe to Drink?
Yes. Hard water at 96.4 ppm in Baltimore is safe to drink. The calcium and magnesium that make water hard are actually essential minerals your body needs daily. The World Health Organization confirms there are no health-based guidelines for water hardness.
At this level, taste is generally good. Most people will not notice a mineral flavor, and the water is perfectly suitable for drinking, cooking, and making coffee or tea.
Your Water vs National Average
Baltimore water at 96.4 ppm is 4% softer than the US average of approximately 100 ppm. This is close to the national average. While not urgently requiring treatment, monitoring for scale buildup is advisable.
Best Solution for 96.4 PPM Water
Consider a shower filter ($15–40) for skin and hair benefits. At 96.4 ppm, a KDF or vitamin C shower filter can reduce mineral contact during bathing. A whole-house salt-free conditioner ($300–800) is an optional but effective way to prevent minor scale buildup on fixtures and appliances without adding sodium to your water.
Baltimore County Water Hardness Map
Soft Moderate Hard Very Hard
Check Another ZIP Code
Nearby ZIP Codes
Frequently Asked Questions
What is the water hardness for ZIP code 21224?
ZIP code 21224 is in Baltimore County, Maryland, with estimated water hardness of 96.4 mg/L (5.6 GPG), classified as moderately hard.
Do I need a water softener in 21224?
With moderately hard water at 96.4 PPM, a water softener is optional. You may notice some minor scale buildup over time.
What county is ZIP code 21224 in?
ZIP code 21224 is in Baltimore County, Maryland (MD).
Is Baltimore water hard or soft?
Baltimore water is classified as moderately hard with an estimated hardness of 96.4 ppm (5.6 GPG). This is moderately hard — some minor mineral effects may be noticeable.
Is hard water in 21224 safe to drink?
Yes, hard water in ZIP code 21224 at 96.4 ppm is safe to drink. The calcium and magnesium minerals are actually beneficial for your health. At this level, the water tastes normal and requires no filtration for drinking purposes.
Will 96.4 PPM water damage my appliances?
At 96.4 ppm (moderately hard), minor scale buildup is possible over many years but significant appliance damage is unlikely. Regular descaling maintenance is sufficient.
Do I need a water softener in Baltimore County?
Baltimore County has moderately hard water at 96.4 ppm. A softener is optional but can help if you notice dry skin or minor scale.
Is Baltimore water OK for aquariums and plants?
Generally yes. At 96.4 ppm, most freshwater fish and plants will do fine. Check species-specific requirements for sensitive fish.