ZIP Code 33923
Lee County, Florida
What This Means
Lee County, Florida has very hard water, estimated at 293 mg/L (PPM). Very hard water causes significant mineral scale buildup that can reduce water heater efficiency, clog pipes, and damage appliances. You'll likely notice white deposits on everything. A water softener is strongly recommended.
What You Should Do
Hardness Details
| ZIP Code | 33923 |
| County | Lee |
| City | — |
| State | Florida (FL) |
| Hardness (PPM) | 293 mg/L — Very Hard |
| Hardness (GPG) | 17.1 grains/gallon |
| Classification | > 180 mg/L |
Source: USGS Water Quality Portal, county-level median
USGS Monitoring Data
| Monitoring Stations | 554 |
| Range | 0.5 – 5000 mg/L |
| Most Recent Data | 2019 |
| Data Quality | Measured |
Source: USGS Water Quality Portal
Effects at 293 PPM Hardness
At 293 ppm, effects are significant: heavy white scale buildup on pipes and fixtures, very dry skin and hair, stiff and scratchy laundry, and reduced water heater efficiency by 25–40%. Expect frequent cleaning of mineral deposits and noticeably higher energy bills from scale-insulated heating elements.
Is Lee County Water Safe to Drink?
Yes. Hard water at 293 ppm in Lee County is safe to drink. The calcium and magnesium that make water hard are actually essential minerals your body needs daily. The World Health Organization confirms there are no health-based guidelines for water hardness.
You may notice a slightly mineral or chalky taste at this hardness level. A drinking water filter (pitcher-style carbon filter or under-sink reverse osmosis system) can improve taste if desired, though the water remains perfectly safe to drink unfiltered.
Your Water vs National Average
Lee County water at 293 ppm is 193% harder than the US average of approximately 100 ppm. This means your area has harder water than most of the country, and a water softener would provide more benefit here than in an average American home.
Best Solution for 293 PPM Water
A high-capacity water softener is strongly recommended ($1,500–3,000+). At 293 ppm, you are dealing with very hard water that causes significant damage to plumbing and appliances. The system pays for itself in reduced energy costs and extended appliance life within 2–3 years. Choose a unit rated for your household size and flow rate, and consider professional installation to ensure optimal performance.
Lee County Water Hardness Map
Soft Moderate Hard Very Hard
Check Another ZIP Code
Nearby ZIP Codes
Frequently Asked Questions
What is the water hardness for ZIP code 33923?
ZIP code 33923 is in Lee County, Florida, with estimated water hardness of 293 mg/L (17.1 GPG), classified as very hard.
Do I need a water softener in 33923?
With very hard water at 293 PPM, a water softener is recommended to protect your plumbing and appliances from mineral scale buildup.
What county is ZIP code 33923 in?
ZIP code 33923 is in Lee County, Florida (FL).
Is Lee County water hard or soft?
Lee County water is classified as very hard with an estimated hardness of 293 ppm (17.1 GPG). This is very hard water — significant scale buildup and mineral effects are expected.
Is hard water in 33923 safe to drink?
Yes, hard water in ZIP code 33923 at 293 ppm is safe to drink. The calcium and magnesium minerals are actually beneficial for your health. You may notice a slightly mineral taste. A simple carbon or reverse osmosis filter can improve taste if desired, but the water is perfectly safe unfiltered.
Will 293 PPM water damage my appliances?
At 293 ppm (very hard), expect significant scale damage. Water heater efficiency can drop 25-40%, and appliance lifespan may be cut in half. A water softener is strongly recommended.
Do I need a water softener in Lee County?
Strongly recommended — Lee County has very hard water at 293 ppm. Without a softener, expect significant scale buildup, higher energy bills, and premature appliance failure.
Is Lee County water OK for aquariums and plants?
Hard water at 293 ppm is too high for most tropical fish. Use an RO filter for aquariums. For houseplants, hard water will cause mineral buildup in soil — flush pots regularly or use filtered water.